!Specifications APM's GPUs

Advanced Power Machinery GPU logo

Home

Company

Products

Features

General General

Applications All models
Brochures Military

Specifications

ADVANCED POWER MACHINERY

SPECIFICATIONS

Models – Configurations and Ratings

Detailed model specific specifications are available on request. Click here

“Will go anywhere” general comments by RAAF personnel

All models can be configured for:

Tarmac use (Low speed, light duty towing)

All terrain use (High speed, heavy duty towing)

Skid-mount (Fixed / Re-locatable position)

Range of outputs available

30 to 180 kVA at the following Frequencies and Voltages

50 or 60 Hz 200 / 115 V to 600 / 346 V

400 Hz 200 / 115 V, AC output only

400 Hz 200 / 115 V, AC or 28 VDC / Jet start output (exclusive, NON simultaneous)

400 Hz 200 / 115 V, AC and 28 VDC / Jet start output (simultaneous)

30 to 180 kVA at the following Frequencies and Voltages

50 or 60 Hz 200 / 115 V to 600 / 346 V

400 Hz 200 / 115 V, AC output only

400 Hz 200 / 115 V, AC or 28 VDC / Jet start output (exclusive, NON simultaneous)

400 Hz 200 / 115 V, AC and 28 VDC / Jet start output (simultaneous)

Typical overall Dimensions

GPU F/C

45 – 60 kVA 3.4 x 2.0 x 1.8 m 2.7 x 1.2 x 1.75 ( LxWxH)

75 – 90 kVA 3.4 x 2.0 x 1.8 m 3.0 x 1.2 x 1.75 ( LxWxH)

120 – 180 kVA 3.8 x 2.0 x 1.8 m 3.3 x 1.2 x 1.75 ( LxWxH)

Basic options

Synchronising facility, Parallel running facility, On-board power distribution,

Extra fuel capacity, Extra low noise, Self propelled,

Low emission (Euro STD), Customised paint scheme, Special customer requirements

All terrain configuration with synchronising and on-board power distribution shown below

Summary of Key Features of APM's GPUs and Frequency Converters in List Form

Ease of use

Intuitive, easy to use, control panel
Guaranteed minimum 12 hours operation on a tank of fuel
EMI/EMC to military standard MIL STD 461D
Reliable, Super bright LEDs
Easy to tow with a range of towing vehicles
Drawbar fitted with 76mm (3") swivel ring coupling

Quiet Operation

73 dBA at 7 meters (GPU)
68 dBA at 7 meters (Frequency converter)

Reliability

Built to ISO 9001
Power output exceeds MIL STD 704E (and BS 2G219-1983)
Tropic proofed alternator windings
Dual bearing brushless alternator
Full solder mask and tropic proofing on circuit boards
Stainless steel threaded fastners (except on engine, which are CAD plated)
Reliable diesel
High performance electronic governer
2 level fuel alarm
Aircleaner restriction warning
State of the art military grade electronics
Zinc annealed steel sheeting used throughout
Water trap in fuel line

Toughness

Certified to NATA test for continuous operation at 50 degrees Celcius at full load
Tropic proofed to work in 100% humidity
Canopy can be walked on

Military Use

Built to handle severe 4G shock loads during transport
Critical components all mounted for severe shock loading
Tie downs for both road and cargo-bay transport to MIL-STD-209H
Integral forklift channels for safe, easy loading.
400mm (16") ground clearance
Short wheel base and high ground clearance to go anywhere
Heavy duty 4 wheel electronic brakes
Extreme duty suspension
Towable at up to 110 km/hr (65 mph)
Low infra-red signature from air
EMI/EMC rated to MIL-STD-461D
Helicopter airlift slinging provisions to MIL-STD-209H
Available with disruptive pattern painting to any military specification

To look at typical applications for APM's GPUs and Frequency Converters please click here. To contact APM for a free appraisal of your GPU requirements please click here.

Advanced Power Machinery
41 Swift Way, Dandenong
Vic., 3175, Australia
Tel +61 3 9768 3038
Fax +61 3 9768 3694
email: info@apmgpu.com